top of page
QHC RANGE:
See brochures below
QHC18M/24M/27M
QHC18M/24//27M 18/24/27Kw Heater Controller standard.
- Total load capacity per controller is 18Kw.
- Operating Voltage 230 Volts AC Single phase & 400 Volts
3 phase.
- Soft Start on all outputs.
- Manual single dial controls all 3 channels. Max load per channel is 6Kw.
- Optional independent channel operation, when used with the QHVC external controller.
- Motion Sensor (PIR) operation a total of 3 can be used,
1 per channel.
- External Switch push button operation a total of 3 can be used, 1 per channel.
- 5 variable power settings 1 - 5.
- Over temperature protection.
- Dimensions H 350mm x W 361mm x D 145mm
- Weight 10Kgs
- HS code: 857109845
QHC24M 24Kw Heater Controller standard.
- Total load capacity per controller is 24Kw.
- Operating Voltage 230 Volts AC Single phase & 400 Volts
3 phase.
- Soft Start on all outputs.
- Manual single dial controls all 3 channels. Max load per channel is 8Kw.
- Optional independent channel operation, when used with the QHVC external controller.
- Motion Sensor (PIR) operation a total of 3 can be used,
1 per channel.
- External Switch push button operation a total of 3 can be used,
1 per channel.
- 5 variable power settings 1 - 5.
- Over temperature protection.
- Dimensions H 350mm x W 361mm x D 145mm
- Weight 12Kg
- HS code: 8537109845
Tested to BS EN60335-2-20
- Total load capacity per controller is 18Kw.
- Operating Voltage 230 Volts AC Single phase & 400 Volts
3 phase.
- Soft Start on all outputs.
- Manual single dial controls all 3 channels. Max load per channel is 6Kw.
- Optional independent channel operation, when used with the QHVC external controller.
- Motion Sensor (PIR) operation a total of 3 can be used,
1 per channel.
- External Switch push button operation a total of 3 can be used, 1 per channel.
- 5 variable power settings 1 - 5.
- Over temperature protection.
- Dimensions H 350mm x W 361mm x D 145mm
- Weight 10Kgs
- HS code: 857109845
QHC24M 24Kw Heater Controller standard.
- Total load capacity per controller is 24Kw.
- Operating Voltage 230 Volts AC Single phase & 400 Volts
3 phase.
- Soft Start on all outputs.
- Manual single dial controls all 3 channels. Max load per channel is 8Kw.
- Optional independent channel operation, when used with the QHVC external controller.
- Motion Sensor (PIR) operation a total of 3 can be used,
1 per channel.
- External Switch push button operation a total of 3 can be used,
1 per channel.
- 5 variable power settings 1 - 5.
- Over temperature protection.
- Dimensions H 350mm x W 361mm x D 145mm
- Weight 12Kg
- HS code: 8537109845
Tested to BS EN60335-2-20
QHVCR Master Controller
QHVCR 3zone RF Controller (Transmitter)
- Battery operation - 3 x AAA batteries, 4.5 Volts DC.
- Save up to 60% on your energy costs.
- 3 dials for independent 3 channel control.
- This device can control multiple QHC heater controllers at the same time.
- Controls all QHC03MR, QHC06MR, QHC18MR and QHC24MR controllers.
- Transmission over 10 different frequencies for use with multiple QHVCR's.
- 5 variable power settings 1 – 5.
- RF 433mHz.
- Range 70 - 100 meters Long Antenna * note: Line of sight, obstacles may reduce the range.
30 – 40 meters Short Antenna. (All controllers within range can be controlled.)
- Battery Low indicator. LED flashes Red.
- Hand held & wall mounted versions available.
- Dimensions H 165mm x W 105mm x D 75mm
- Weight 0.5Kg
- HS code: 85255000
- Battery operation - 3 x AAA batteries, 4.5 Volts DC.
- Save up to 60% on your energy costs.
- 3 dials for independent 3 channel control.
- This device can control multiple QHC heater controllers at the same time.
- Controls all QHC03MR, QHC06MR, QHC18MR and QHC24MR controllers.
- Transmission over 10 different frequencies for use with multiple QHVCR's.
- 5 variable power settings 1 – 5.
- RF 433mHz.
- Range 70 - 100 meters Long Antenna * note: Line of sight, obstacles may reduce the range.
30 – 40 meters Short Antenna. (All controllers within range can be controlled.)
- Battery Low indicator. LED flashes Red.
- Hand held & wall mounted versions available.
- Dimensions H 165mm x W 105mm x D 75mm
- Weight 0.5Kg
- HS code: 85255000
QHC06MRE
QHC06MR 6Kw Infrared Heater Controller RF wireless 433mHz (Receiver)
- Save up to 60% on your energy costs.
- Operating Voltage 230 Volts AC Single phase.
- Soft Start.
- Single channel max load 6Kw.
- 5 variable power settings 1 – 5, for Energy & Cost Saving.
- Remote Control via QHVCR wireless RF Controller (Transmitter).
- RF 433mHz.
- Range 70 - 100 meters* Long Antenna
30 – 40 meters * Short Antenna * note: Line of sight, obstacles may reduce the range.
- Motion sensor (PIR) operation.
- IP Rating: IP56.
- Dimensions H 200mm x W 180mm x D 120mm.
- CE certified.
- Weight 1.5 Kgs.
- HS code: 8537109845
- Save up to 60% on your energy costs.
- Operating Voltage 230 Volts AC Single phase.
- Soft Start.
- Single channel max load 6Kw.
- 5 variable power settings 1 – 5, for Energy & Cost Saving.
- Remote Control via QHVCR wireless RF Controller (Transmitter).
- RF 433mHz.
- Range 70 - 100 meters* Long Antenna
30 – 40 meters * Short Antenna * note: Line of sight, obstacles may reduce the range.
- Motion sensor (PIR) operation.
- IP Rating: IP56.
- Dimensions H 200mm x W 180mm x D 120mm.
- CE certified.
- Weight 1.5 Kgs.
- HS code: 8537109845
3 Phase Manual Heater Controller
QHC18/24/27M-3z 18/24/27Kw 3 Zone Heater Controller.
- Total load capacity per controller is 18Kw.
- Operating Voltage 230 Volts AC Single phase & 400 Volts
3 phase.
- Soft Start on all outputs.
- Manual 3 dial controls 3 channels independently.
Max load per channel is 6Kw.
- Optional independent channel operation, when used with the QHVC external controller.
- Motion Sensor (PIR) operation a total of 3 can be used,
1 per channel.
- External Switch push button operation a total of 3 can be used, 1 per channel.
- 5 variable power settings 1 - 5.
- Over temperature protection.
- Dimensions H 350mm x W 361mm x D 145mm
- Weight 10Kgs
- HS code: 8537109845
- Total load capacity per controller is 18Kw.
- Operating Voltage 230 Volts AC Single phase & 400 Volts
3 phase.
- Soft Start on all outputs.
- Manual 3 dial controls 3 channels independently.
Max load per channel is 6Kw.
- Optional independent channel operation, when used with the QHVC external controller.
- Motion Sensor (PIR) operation a total of 3 can be used,
1 per channel.
- External Switch push button operation a total of 3 can be used, 1 per channel.
- 5 variable power settings 1 - 5.
- Over temperature protection.
- Dimensions H 350mm x W 361mm x D 145mm
- Weight 10Kgs
- HS code: 8537109845
18kW 3 phase remote Heater Controller (receiver) QHC18MRE
The QHC18MRE is a wireless RF receiver which controls the power to infrared heaters up to a load capacity of 18kWatts. This device is paired with the 3 zone remote Master Controller (QHCVR). Any number of these devices can be in a zone, as long as they are within the 100meter transmit range.
3 Phase controller
3 Phase controller
QHVC-S
Controller
QHVC-S RANGE.
- Manual control modules, 3 types.
- Single and 3 zone operation.
- 5 variable power settings 1 - 5.
- Hardwired up to 20 meters from main controller, from our range.
- Supply voltage : 5 volt external.
- Mounting Flanged bracket.
- IP rating : IP54.
- Material : ABS plastic.
- Colour : Grey.
- Dimensions : 145mm x 65mm x 55mm.
- Weight : 0.2kgs.
- HS code : 85365080.
- Manual control modules, 3 types.
- Single and 3 zone operation.
- 5 variable power settings 1 - 5.
- Hardwired up to 20 meters from main controller, from our range.
- Supply voltage : 5 volt external.
- Mounting Flanged bracket.
- IP rating : IP54.
- Material : ABS plastic.
- Colour : Grey.
- Dimensions : 145mm x 65mm x 55mm.
- Weight : 0.2kgs.
- HS code : 85365080.
QHTSw Range
Touch Switch and Timer.
- Touch switch control modules, 2 types.
- These items are sold separately.
- On/Off setting with built in timer.
- QHTsw-2m Hardwired up to 2 meters from main controller.
- Supply voltage : 240volt.
- Load capacity : 5.5kW
- IP rating : IP56.
- Material : ABS plastic.
- Colour : Grey.
- QHTsw45 Dimensions : 150mm x 110mm x 70mm.
- QHTsw45 Weight : 1kg.
- HS code : 8537109845.
- Touch switch control modules, 2 types.
- These items are sold separately.
- On/Off setting with built in timer.
- QHTsw-2m Hardwired up to 2 meters from main controller.
- Supply voltage : 240volt.
- Load capacity : 5.5kW
- IP rating : IP56.
- Material : ABS plastic.
- Colour : Grey.
- QHTsw45 Dimensions : 150mm x 110mm x 70mm.
- QHTsw45 Weight : 1kg.
- HS code : 8537109845.
9kW remote Heater Controller (receiver) QHC09MR
The QHC09MR is a wireless RF receiver which controls the power to infrared heaters up to a load capacity of 9kWatts. This device is paired with 3 Zone remote Master Controller QHVCR. Any number of these devices can be in a zone as long as they are within the 100 meter transmit range.
Single phase controller
Single phase controller
12kW 3 Phase remote Heater Controller (receiver) QHC12MRE
The QHC12MRE is a wireless RF receiver which controls the power to infrared heaters up to a load capacity of 12kWatts. This device is paired with the 3 Zone remote Master Controller QHVCR. Any number of these devices can be in a zone as long as they are within the 100 meter transmit range.
3 phase controller
3 phase controller
External 8 zone control module QHVC-S08
The QHVC-S08 is an external eight zone control module used in conjunction with up to 8 single phase manual QHC06M controllers. This device is hard wired externally to the controller over a distance of 20 to 30 meters. Giving easy access to the QHC controller when located in a back office or basement.
QHPCB
Replacement control board
QHRSW1
Replacement front panel rotary switch board
QHDB18 & 24
Distribution box for 18kW, 24kW or 27kW QHC Controllers
QHPIR
PIR Motion sensor
Three zone 3 phase manual Heater Controller
QHC18M-3Z, QHC24M-3Z & QHC27M-3Z are manual 3 phase heater control panels with load capacities of 18, 24, 27 kWatts across 3 outputs (channels) which can be varied separately.
Save up to 60% on your energy costs by using any of these three controllers.
The controllers are fitted with an isolation switch for the incoming 3 phase supply and with MCB's for circuit protection on the three outputs.
There are additional facilities for a timer function via auxiliary inputs for external switches NO (normally open) contacts.
There are also inputs for a mains switch (trigger) voltage for use with PIR motion detectors or an external 7-day programmable timer.
Save up to 60% on your energy costs by using any of these three controllers.
The controllers are fitted with an isolation switch for the incoming 3 phase supply and with MCB's for circuit protection on the three outputs.
There are additional facilities for a timer function via auxiliary inputs for external switches NO (normally open) contacts.
There are also inputs for a mains switch (trigger) voltage for use with PIR motion detectors or an external 7-day programmable timer.
bottom of page